Molding Machinery

With our hydraulic and all-electric injection molding machines, we are your high-performance partner for the realisation of all process variants and special processes.

Molding Machines

VS series

  • Prepared for the future - through its excellent accessibility, the VS Performance range offers comprehensive possibilities for operation and for the adaptation of automation and demoulding stations.
  • An added advantage is the flexibility in your production through a slimline, variable and compact machine installation without the requirement for platforms or pits.
  • Clamping force...................... 1,600 to 8,000 kN
  • Injection volumes........... 1,000 to 8,500 cm3
  • Daylight............... 850 to 1,350 mm
  • Heating plate size..........560 x 630 mm to 1,000 x 1,200 mm
LOOK

VR series

  • Flexibility combined with maximum stability and rigidity
  • The high rigidity of the frame in conjunction with one or more fully hydraulic clamping cylinders guarantee optimum pressure distribution in the clamping level.
  • The design of the frame provides room for manoeuvres in terms of the alignment of the clamping surfaces, which are difficult to realise with other machine types.
  • Clamping force.............................................................1.100 bis 8.000 kN
  • Injection volumes......................................630 bis 8.500 cm3
  • Daylight..............................................495 bis 1.000 mm
  • Heating platen size.....400 x 500 mm to 900 x 1.100 mm
LOOK

VC series

  • Standard for limitless free space
  • VC Performance range offers enlarged mould loading areas for highly complex injection and press moulds.
  • The VC Performance is ideal for profile processing due to its tiebarless configuration, because this design guarantees optimum accessibility from three sides.
  • The tiebarless C-machines with up to 1,600 kN clamping force in a downstroking design is a particularly important aspect when profiles are to be joined, in order to avoid an unwanted movement during the closing process.
  • Clamping force................................................................... 300 to 2,500 kN
  • Injection volumes 56 to 622 cm3 (RS) / 100 bis 1.000 cm3 (E)
  • Daylight.............................................................630 to 850 mm
  • Heating platen size............. 500 x 400 mm to 1,100 x 700 mm
LOOK

VP series

  • The specialists in vacuum applications
  • The VP machine range with integrated vacuum chamber is specifically designed for evacuation possibilities across the entire mould area.
  • The clamping unit consists of a bolted plate structure, the vertical side plates of which simultaneously act as walls for the vacuum chamber
  • A vacuum system consisting of vacuum pump(s) and a vacuum tank ensures rapid and effective evacuation. Alternatively, other combinations can also be used if required.
  • Clamping force........................................................... 1,100 to 6,300 kN
  • Injection volumes............................................... 160 to 8,500 cm3
  • Heating platen size.......... 400 x 500 mm to 810 x 1,000 mm
LOOK

H series

  • Horizontal machines for automated production
  • We offer machines in a horizontal design either in a traditional column version (HS) or with a tiebarless C-frame clamping unit (HC).
  • An outstanding feature of the HC range, with its up to 100 ton clamping force, is the tiebarless design of the clamping unit. This is based on the proven C-frame clamping unit and offers free access to the mould area for rapid mould change of the integration of automation devices.
  • The machines from the HS range, from 160 ton clamping force, are based on a clamping unit in 4-column design, equipped with a fully-hydraulic clamping system. Through the use of a large pressure piston, force will be brought evenly into the mould.
  • Large distances between the bars offer good access to the mould for rapid mould changes and the use of large heating platen. The increased daylight is particularly well-suited for the use of brush units and other handling devices.
  • Clamping force................................................................ 500 to 6,300 kN
  • Injection volumes.................................................. 50 to 8,500 cm3
  • Daylight............................................................... 475 to 915 mm
  • Heating platen size...............400 x 400 mm to 810 x 1,000 mm
LOOK

Micro series

  • Small, smaller, micro-class - Machines in the smallest of sizes
  • The Micro-Class injection moulding machines are equipped with a C-frame clamping unit with 100 kN clamping force and are available in both vertical and horizontal designs.
  • The machine concept is highly compact by design and is optimally suited for combination with handling equipment due to the accessible mould area. With the design of the machine, the focus was on maximum compactness, so that a space of about one square metre accommodates not only the machine itself, but also two temperature control units
  • The precision injection unit is designed for the smallest volumes and guarantees highest repeatability and is optionally available for processing rubber or plastic.
  • Clamping force......................................................................... 100 kN
  • Injection volumes....................................................... 4.5 / 6 / 10 cm3
  • Daylight ................................................................................ 300 mm
  • Heating platen size....................................................... 150 x 150 mm
LOOK

NETSTAL mašine za brizganje

NETSTAL ELION MED (800 - 2800 kN)

  • Opcije opreme do klase ciste sobe ISO 5
  • Visoka produktivnost i savrsena preciznost
  • Glatki i tihi rad sa minimalnim emisijama
  • Pametan rad kako bi se osigurala usklađenost sa rukovanjem GMP -om
POGLEDAJ

NETSTAL ELIOS (4500 - 10000 kN)

  • Najbrža mašina za pakovanje - Maksimalan učinak, najbolji kvalitet, niski jedinični troškov
  • Najveća preciznost i apsolutna pouzdanost
  • Najbolja energetska efikasnost zahvaljujući najsavremenijoj hibridnoj tehnologiji sa rekuperacijom energije
  • Vrlo jednostavno za korišćenje zahvaljujući inovativnim detaljnim rešenjima
POGLEDAJ

NETSTAL ELION (800 - 4200 kN)

  • Aplikacija – specificne opcije konfiguracije
  • Visoka produktivnost i savrsena preciznost
  • Najbolja pouzdanost i dostupnost
  • Minimalna potrosnja energija
POGLEDAJ

NETSTAL PET-LINE (2400 - 5000 kN)

  • 3 platforme sa silom stezanja od 2400, 4000 i 5000 kN
  • 24–144 šupljine
  • Prilagodljiva pogonska jedinica sa optimalnom energetskom efikasnošću
  • Opcija CPP za sigurnu proizvodnju predformi u teškim industrijskim okruženjima
POGLEDAJ

NETSTAL SMART OPERATION

  • Visoka raspolozivost
  • Poboljsane performanse
  • Visi kvalitet
  • Mogucnost naknadne nadogradnje
POGLEDAJ

PET Sistemi

NETSTAL PET-LINE (2400 - 5000 kN)

  • 3 platforme sa silom stezanja od 2400, 4000 i 5000 kN
  • 24–144 šupljine
  • Prilagodljiva pogonska jedinica sa optimalnom energetskom efikasnošću
  • Opcija CPP za sigurnu proizvodnju predformi u teškim industrijskim okruženjima
POGLEDAJ

What is the best solution for you?

Schedule a free consultation

book now

You need a specific offer?

CONTACT US
Scroll to Top